Models | WMTA Pumps | Warrender Ltd.

WMTA Alloy Turbine Mag-Drive Pumps

Series WMTA

- Mag-Drive Single Stage Turbine

WMTA machined billet regenerative turbine seal-less mag-drive pumps (superseding the MTA) can be constructed for high system pressures and special alloy configurations. All WMTA pumps are equipped with zero leakage magnetic couplings to meet the latest toxic emissions regulations. The absence of elaborate mechanical seal systems eliminates costly pump maintenance, lost production time and process contamination. Variations in head calculations have minimal effect on the flow of a turbine pump. Also, turbine pumps can be throttled to a required duty point without by-passing.

Features

High head/ low flow capability minimizes by-pass requirements and prevents overheating of centrifugals and high head cavitation
Self balancing impeller – Zero axial thrust loading
Impeller design handles up to 20% entrained gas-ideal for pumping liquefied gases
No galling or metal to metal contact
Heavy duty alloy containment shell
High torque magnets, suitable for direct starting motors

Technical Data

Flow: 25-45 GPM (.5-10 m³/H)
Head: To 700 feet (213 m)
Temperature Ratings: -148 to 600°F (-100 to 316°C)
Pressure ratings: 7250 PSI (500 Bar)

Materials

AISI SS-316 Stainless Steel, Alloy-20, Incoloy-825, Hastelloy-C27, *(Carbon Steel, Titanium, Casteloy)

Documentation Downloads

Brochure Links

WMTA6-LN-2S/3S Multistage Turbine Mag-Drive Pumps

Series WMTA-MS

- Mag-Drive Multistage Stage Turbine

Warrender Series WMTA – LN Mag-drive regenerative turbine pumps safely meet high head, low NPSA system requirements. Dynamic turbine impeller pumping action handles entrained gases to resist vapor locking.

WMTA- LN multi-stage magnetic drive process pumps have been designed for applications requiring low flows at high heads but with low NPSHa. WMTA6 magnetic drive process pumps are top suction top discharge, two and three stage configurations, with a centrifugal first stage impeller / inducer to achieve low NPSH values. The second and third stage are regenerative turbine impellers that develop heads up to and 1000 feet at 60 Hz. WMTA6 magnetic drive process pumps have been specifically designed for liquefied gases (e.g. NH3, CO2, LPG, Butane, etc.). In Particular, refrigeration applications where the total absence of liquid vapor releases to plant and personnel, or CFC derivatives into the atmosphere that is harmful to the environment. The robust construction is achieved by machined billet from forged bars, and their seal less design, results in a safe, reliable and durable pump suitable for oil and gas refineries, chemical plants and OEM systems. When required, the WMTA6 pumps can be built in an API-685 configuration.

Features

High head pumping with pulsation free performance
Handles up to 20% entrained gas, resists vapor locking
Dynamic design (avoid over pressurization w/ P.D. pumps)
Low heat induction to avoid flashing

Technical Data

Flow: 0.25- 45 GPM (0.5 - 10 m³/H)
Head: To 900 feet (230 m)
Temperature Ratings: -148 to +572°F (-100 to +300°C)
Pressure ratings: to 1450 PSI (100 Bar)
NPSHr to 1”

Materials

SS 316 Stainless Steel, Carbon Steel, Hastelloy-C27, Titanium

Documentation Downloads

-WMTA-LN-2 Stage Curves 50-60Hz

-WMTA-LN-3 Stage Curves_50-60Hz

-Dimension Drawing

-IOM Manual

-New Seal-less Mag-Drive Pumps Brochure

-Data Sheet

WMT Billet PP/PVDF Turbine Mag-Drive Pumps

Series WMT

- Mag-Drive Turbine

MT Series (WMT) machined thermoplastic regenerative turbine seal-less Mag-Drive Pumps are ideally suited to low applications, MT regenerative turbine pump avoid oversized centrifugals that require flow by-passing and excessive horsepower. MT non-metallic turbine designs have excellent chemical resistance and extremely low wear characteristics. Variations in head calculations have minimal effect on the flow of the turbine pump. Also, turbine pumps can be throttled to a required duty point without by-passing.

Features

Exclusive solid machined PP or PVDF casings and impellers components
Heavy casing wall thicknesses
Resists external corrosion
Self-Balancing impeller eliminates thrust bearing wear
Handles up to 20% entrained gas, resists cavitation
Direct starting, standard NEMA motors

Technical Data

Flow: 0.6-65 GPM (0.13-13 m³/H)
Head: To 180 feet (55 m)
Temperature Ratings: To 200°F (95°C)
Pressure ratings: 100 PSIG (7 Bar)

Materials

PP, PVDF, ETFE

Documentation Downloads

-Composite Brochure Seal-less Mag-Drive

-Solid PP & PVDF Thermoplastic Mag-Drive

-Data Sheet

WMT-SP Billet PP Self-Primer Pumps

Series MTSP

- Mag-Drive Turbine Sel-Primer

MTSP machined thermoplastic self-priming regenerative turbine seal-less mag-drive pumps provide smooth, continuous, and leak-proof operation where top unloading is required. The same basic features of self-Siphoning pumps apply to The Self-Priming series design with the addition of a self-contained, self priming pump casing.

Features