Models | Warrender Ltd. | Seal-Less Magnetic Pumps

WMCH Billet PP/PVDF Mag-Drive Pumps

Series WMCH

Mag-Drive Centrifugal

WMCP machined thermoplastic horizontal centrifugal seal-less mag-drive pumps (MCH Series) are fabricated from SOLID GLASS FREE Simona® PP or PVDF thermoplastics to resist internal or external corrosion. Heavy walled, CNC machined construction provide far greater resistance to permeation and migration of corrosive and permeating liquids. Additionally, added strength and thermal stability resists deformation, even in the most severe applications.

Features

Exclusive SOLID GLASS FREE machined PP or PVDF casings and impellers components for maximum chemical resistance.
All plastic casing withstands external corrosion
Integral raised face flanges (no threaded adapters) to ensure zero leakage
Modular impeller allows for varying hydraulic performances
Oversized, high purity ceramic or silicon carbide thrust bearings and shaft
Standard, direct starting NEMA motors

Technical Data

Flow: 3-500 GPM (.68-113 m³/H)
Head: To 175 feet (53 m)
Temperature Ratings: To 200°F (95°C)
Pressure ratings: 100 PSIG (7 Bar)

Materials

PP, PVDF

Documentation Downloads

Replacement Parts:

Rear Wet End Kits, Shaft, Sleeve & Thrust Bearings, Impeller & Casing wear Rings, Internal Magnets, Casing Gaskets, Power/ Bearing Frame Components

WMT Billet PP/PVDF Turbine Mag-Drive Pumps

Series WMT

- Mag-Drive Turbine

MT Series (WMT) machined thermoplastic regenerative turbine seal-less Mag-Drive Pumps are ideally suited to low applications, MT regenerative turbine pump avoid oversized centrifugals that require flow by-passing and excessive horsepower. MT non-metallic turbine designs have excellent chemical resistance and extremely low wear characteristics. Variations in head calculations have minimal effect on the flow of the turbine pump. Also, turbine pumps can be throttled to a required duty point without by-passing.

Features

Exclusive solid machined PP or PVDF casings and impellers components
Heavy casing wall thicknesses
Resists external corrosion
Self-Balancing impeller eliminates thrust bearing wear
Handles up to 20% entrained gas, resists cavitation
Direct starting, standard NEMA motors

Technical Data

Flow: 0.6-65 GPM (0.13-13 m³/H)
Head: To 180 feet (55 m)
Temperature Ratings: To 200°F (95°C)
Pressure ratings: 100 PSIG (7 Bar)

Materials

PP, PVDF, ETFE

Documentation Downloads

-Composite Brochure Seal-less Mag-Drive

-Solid PP & PVDF Thermoplastic Mag-Drive

-Data Sheet

M Molded PP/PVDF Centrifugal Mag-Drive Pumps

Series M

Mag-Drive Centrifugal

WMCP molded horizontal centrifugal seal-less mag-drive thermoplastic pumps (PROMAG M SERIES) provide high reliability, with emphasis on optimum chemical compatibility. Interchangeable impellers provide flexibility for precisely matching head and flow capacities. WMCP Molded Horizontal pumps can be used in a wide range of acids and alkaline solutions up to temperatures of 180°F

Features

Heavy walled casing for added strength, pressure and temperature resistance
Volute casting for optimum efficiencies and performances
Interchangeable impellers, independent of internal magnets
High torque, low mass magnetic couplings resist uncoupling
Oversized internal shaft, sleeve and thrust bearings
Standard 56C & 143TC NEMA frame motors

Technical Data

Flow: 2-175 GPM (.45-40 m³/H)
Head: To 110 feet (33 m)
Temperature Ratings: To 180°F (85°C)
Pressure ratings: 50 PSI (3 Bar)

Materials

PP, PVDF

Documentation Downloads

Replacement Parts:

Rear Wet End Kits, Shaft, Sleeve & Thrust Bearings, Impeller & Casing wear Rings, Internal Magnets, Casing Gaskets, Power/ Bearing Frame Components

MV Molded PP Vertical Mag-Drive Pumps

Series MV

Mag-Drive Centrifugal

MV Molded vertical centrifugal seal-less mag-drive thermoplastic pumps (PROMAG MV SERIES) are engineered for reliability, durability and chemical resistance. Molded vertical pumps are best suited for filtration and spray systems, in tank and sump applications. Complete isolation of the motor from the process liquid prevents internal corrosion, air entrainment or product contamination. Zero-leakage operation ensures maximum safety and full compliance with toxic emissions regulations.

Features

Heavy walled casing for added strength, pressure and temperature resistance
Volute casting for optimum efficiencies and performances
Interchangeable impellers, independent of internal magnets
High torque, low mass magnetic couplings resist uncoupling
Oversized internal shaft, sleeve and thrust bearings
Standard 56C & 143TC NEMA frame motors
Quick-change rear cartridge assembly allows ease of servicing and reduces maintenance costs
High-torque magnetic couplings eliminate need for soft-starting motors
All ports are raised-face 150 lb or 300 lb ANSI flanges (600 lb and 900 lb are also available)

Technical Data

Flow: 2-175 GPM (.45-40 m³/H)
Head: To 110 feet (33 m)
Temperature Ratings: To 180°F (85°C)
Pressure ratings: 50 PSI (3 Bar)

Materials

PP, PVDF

Documentation Downloads

Replacement Parts:

Rear Wet End Kits, Shaft, Sleeve & Thrust Bearings, Impeller & Casing wear Rings, Internal Magnets, Casing Gaskets, Power/ Bearing Frame Components

WMCH-SP Billet PP Mag-Drive Self-Primer

Series WMCH-SP

Mag-Drive Centrifugal Self-Primer

WMCH-SP machined thermoplastic self priming centrifugal seal-less mag-drive pumps (MCHSP Series) apply to the Self-Priming design with the addition of a self-contained, self-priming pump casing. Machined Horizontal Self-Priming pumps provide smooth continuous leak-proof operation where top unloading is specified.

Features

Exclusive SOLID GLASS FREE machined PP or PVDF casings and impellers components for maximum chemical resistance
All plastic casing withstands external corrosion
Integral raised face flanges (no threaded adapters) to ensure zero leakage
Modular impeller allows for varying hydraulic performances
Oversized, high purity ceramic or silicon carbide thrust bearings and shaft
Standard, direct starting NEMA motors

Technical Data